Kodak DRHD-120 BeforeYouStart, Whats in the box, Putting the batteries in the remote control

What's in the box

Thank you for buying this product. Please confirm that the following accessories are in the box when you open it.

Accessories

RF cable

Audio/Video cable

Remote control

AA dry cell batteries x 2

Scart cable	Operating instruction
	(this manual)

Putting the batteries in the remote control

1	Open the battery compartment
	cover on the back of
	the remote control.

BeforeYouStart

2	Insert two AA/R03 batteries into
	the battery compartment
	following the indications
	(+, -) inside the
	compartment.
3	Close the cover.

Using the remote control

Keep in mind the following when using the remote control :

•Make sure that there are no obstacles between the remote and the remote sensor on the unit.

•Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the unit's remote sensor.

•Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit.

•Replace the batteries when you notice a fall off in the operating range of the remote.

NOTE

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

•Don't mix new and old batteries together.

•Don't use different kinds of batteries together-although they may look similar, different batteries may have different voltages.

•Make sure that the plus and minus ends of each battery match the indications in the battery compartment.

•Remove batteries from equipment that isn't going to be used for a month or more.

•When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

Before You Start 5