Quality Control Procedures

Running a Daily QC Test The MQSA requires that a sensitometric test be run daily and that clinical images be made only when the control chart is within the control ranges. Kodak recommends the following laser imager test. Perform this test daily before clinical mammograms are performed, to ensure quality output. Plot the values obtained from the test on the chart for comparison with the film parameter values established in the baseline test.

1.Apply power to the 8900 and allow it to warm to READY, as indicated on the local panel. Request a Calibration Test Print (see “Requesting a Calibration Test Print” on page 3-19) to put the Automatic Image Quality Control (AIQC) system in control.

2.Print a QC Step Wedge film per the procedure on page 3-20of this User Guide.

3.Use a densitometer to read the designated steps on the test film. Read at the center of each step. If a clear area on the film was used instead of the step 1 area in the baseline tests (see “Baseline Test” on

page A-2), use a clear area in this QC test.

4.Record the date on the chart. Then plot the DD, MD, and Base Plus Fog values in the appropriate column on the chart.

5.Determine if any of the values exceeds the control limits for the parameter.

NOTE: The numbers above and below the center lines on the chart indicate the control limits. For example, for DD or MD, 0.10 above or below the center line is approaching the limit, but is acceptable. However, 0.15 above or below the line is not acceptable.

6.If the values did not exceed a control limit, examine the chart and see if there is a trend that suggests possible future problems. (This could be, for example, three or more data points for DD, MD or Base Plus Fog in succession moving upward or downward.) If the data points have not exceeded the limits, clinical mammograms can continue to be run.

7.If any value exceeds a control limit, DO NOT run clinical mammograms until the problem is corrected. Proceed as follows:

a.Circle the out of control point(s) on the chart.

b.Correct the problem. The fault could be in the film, imager or densitometer, or in the performance of the QC procedure.

January 10, 2006

5E6155

A-5

Page 119
Image 119
Kodak DryView 8900 manual A-2, use a clear area in this QC test, Circle the out of control points on the chart

DryView 8900 specifications

The Kodak DryView 8900 is a state-of-the-art dry imaging system that revolutionizes medical imaging with its advanced technology and unparalleled performance. Designed primarily for the healthcare sector, this system delivers high-quality printed images for various diagnostic applications, making it an essential tool for hospitals, clinics, and imaging centers.

One of the standout features of the Kodak DryView 8900 is its exceptional image quality. The system utilizes advanced imaging algorithms and high-resolution printing capabilities to produce crisp, clear images that facilitate accurate diagnosis and enhanced patient care. This high fidelity is crucial in fields such as radiology, mammography, and other imaging modalities where precision is paramount.

Incorporating thermal imaging technology, the DryView 8900 eliminates the need for traditional wet processing chemicals, which is not only environmentally friendly but also simplifies the workflow in medical facilities. This dry imaging process results in faster turnaround times for print production, allowing clinicians quick access to essential imaging data.

The DryView 8900 also boasts a user-friendly interface, designed with healthcare professionals in mind. Its intuitive controls and straightforward operation minimize the learning curve, enabling users to navigate the system efficiently. Moreover, the printer supports a variety of film sizes and formats, providing flexibility to meet the diverse needs of medical imaging departments.

Another impressive characteristic of the Kodak DryView 8900 is its durability and reliability. Built with robust components, the system is designed to handle the rigorous demands of a busy clinical environment. Regular maintenance and servicing are streamlined, helping to maintain optimal performance and reduce downtime.

Additionally, the Kodak DryView 8900 incorporates connectivity options that allow seamless integration with existing imaging systems and PACS (Picture Archiving and Communication Systems). This connectivity ensures that the DryView 8900 can receive high-quality images directly from modalities, enhancing the overall efficiency of the imaging process.

In summary, the Kodak DryView 8900 is a cutting-edge imaging solution that combines remarkable image quality, user-friendly design, and reliable performance. With its dry imaging technology, broad compatibility, and environmental considerations, this system stands out as a vital asset in today’s medical imaging landscape, driving advancements in healthcare delivery and patient outcomes.