Kodak DryView 8900 manual Recommended Separation Distance

Safety and Related Information

Guidance and Manufacturer’s Declaration for Electromagnetic Immunity

The Kodak DryView 8900 Laser Imager is intended for use in the electromagnetic environment specified below. The customer or user of the Kodak DryView 8900 Laser Imager should assure that it is used in such an environment.

Immunity	IEC 60601 Test	Compliance	Electromagnetic Environment - Guidance
Test	Level	Level
			Portable and mobile RF communications equipment should be
			used no closer to any part of the Kodak DryView 8900 Laser
			Imager, including cables, than the recommended separation
			distance calculated from the equation applicable to the
			frequency of the transmitter.
			Recommended Separation Distance:
Conducted RF	3 Vrms	3 Vrms	d = 1.17	P
IEC 61000-4-6	150 kHz to 80 MHz
Radiated RF	3 v/m	3 v/m	d = 1.17	P	80 MHz to 800 MHz
IEC 61000-4-3	80 MHz to 2.5 GHz		d = 2.33	P	800 MHz to 2.5 GHz
			d is the recommended separation distance in meters (m).
			P is the maximum output rating of the transmitter in watts (W)
			according to the transmitter manufacturer.
			Field strengths from fixed RF transmitters, as determined by an
			electromagnetic site survey a, should be less than the
			compliance level in each frequency range b.
			Interference may occur in the vicinity of equipment marked
			with the following symbol:

NOTE:

•At 80 MHz and 800 MHz, the higher frequency range applies.

•These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.

aSee Note 1 on next page.

bSee Note 2 on next page.

January 10, 2006 5E6155 1-15