Kodak DryView 8900 manual Local Panel Error

Troubleshooting

Main Status Screen

Details

No Media

Offline

The imager can accept job requests, but film is not available for at least 1 current job.

The imager will not accept any DICOM job requests.

Local Panel Error	The following table lists the error messages displayed on the local panel.
Messages	When an error message is displayed, perform the operator action listed in
	the table for that message.
	When an error message occurs, an audible alarm will sound.
	To silence the audible alarm:
	1. When an error message appears, touch anywhere in the error pop-up
	menu.
	2. When a no-media message appears, touch any tray button or the Job
	Management button on the Status screen.
	NOTE: The laser imager prints a job only with the specified size/media
	base type requested. If the size/base is not loaded, the print
	request is put into the “No Media” queue and the laser imager
	waits for the correct type to be loaded.
	If this action does not clear the error message, call an Authorized Service
	Provider of Kodak products. When you make a service call, be prepared
	with the error message and message number (see “Calling for Support” on
	page 4-33).

Preventive Maintenance Icon

NOTE: The laser imager displays a local panel icon when preventive maintenance and cleaning are recommended. Preventive maintenance and cleaning ensure optimum imager performance. The preventive maintenance message will not interfere with normal operation and is intended to let you schedule a convenient time for preventive maintenance performed by an Authorized Service Provider of Kodak products.

January 10, 2006 5E6155 4-3