Kodak DryView 8900 manual GHz, 100

Safety and Related Information

Guidance and Manufacturer’s Declaration for Electromagnetic Immunity

Note 1

Note 2

Field strengths from fixed transmitters, such as base station for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the Kodak DryView 8900 Laser Imager is used exceeds the applicable RF compliance level above, the Kodak DryView 8900 Laser Imager should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the Kodak DryView 8900 Laser Imager.

Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 v/m.

Recommended separation distance between portable and mobile RF communications

equipment and the Kodak DryView 8900 Laser Imager

The Kodak DryView 8900 Laser Imager is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the Kodak DryView 8900 Laser Imager can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communication equipment (transmitters) and the Kodak DryView 8900 Laser Imager as recommended below, according to the maximum output of the communications equipment.

Rated maximum output	Separation distance (d) according to frequency of transmitter
power of transmitter (P)		in meters (m)
in Watts (W)
	150 kHz to 80 MHz	80 MHz to 800 MHz	800 MHz to 2.5	GHz
	d = 1.17 P	d = 1.17 P	d = 2.33 P
0.01

0.1

1

10

100

1-16 5E6155 January 10, 2006