Kodak DryView 8900 Requesting a QC Step, Wedge, Printing a DVM DryView, Mammography Test, Pattern

Operation and Maintenance

Requesting a QC Step	To request a QC Step Wedge:
Wedge	1.	Request a Calibration Test Print (see “Requesting a Calibration Test
		Print”) to put the AIQC system in control.
	2.	On the System Function Screen, touch the QC Step Wedge for
		DVM button.
	3.	Touch the desired drawer button (DVM film type).
	4.	Touch the Print button.
Printing a DVM (DryView	If the mammography upgrade is installed and enabled in your imager, you
Mammography) Test	can print two special test patterns designed to verify that your imager meets
Pattern	image quality standards required for mammography.
	To print a test pattern:
	1.	On the System Functions screen, touch the button labeled More
		DVM Test Patterns. The DVM Test Patterns screen appears.

List of Test

Patterns

2.In the list of test patterns, touch the test pattern you wish to print.

3.Touch the desired drawer button (DVM film type).

4.Touch the Print button.

3-20 5E6155 January 10, 2006