Manuals / Ricoh / Computer Equipment / Printer

Ricoh AP505 manual When the Message Open, Misfeed Appears, Bypass tray

Models: AP505

1 80

Download 80 pages 57.58 Kb

Page 57

Removing Misfed Paper

When the Message "REMOVE

MISFEED FROM INPUT TRAY"

Appears

Bypass tray

ACarefully pull the misfed paper.

Make sure that you do not leave any misfed paper in the printer.

Standard Tray (Tray 1) or Paper Feed Unit (Tray 2/3)

APull out the paper tray gently, be- ing careful not to tear the misfed paper, and remove the misfed pa- per.

Make sure that you do not leave any misfed paper in the printer.

TFWY170E

Note

❒If your printer has an optional paper feed unit installed, check all paper trays for misfeeds.

BSlide the paper tray completely into the printer.

Important

❒Be sure to insert the paper tray completely. Otherwise, mis- feeds might occur, or the front cover might touch the paper tray.

COpen the front cover, and then close it to reset the misfeed condi- tion.

4

TFWY180E

BWhen paper is left in the bypass tray, remove the paper.

CClose the bypass tray, open the front cover, and then close it to re- set the misfeed condition.

DReload paper into the bypass tray.

When the Message "OPEN

FRONT COVER REMOVE

MISFEED" Appears

RCAUTION:

•When removing misfed paper, do not touch the fusing section because it could be very hot.

39

Image 57

Ricoh AP505 When the Message Open, Misfeed Appears, Bypass tray, Standard Tray Tray 1 or Paper Feed Unit Tray 2/3

Contents

Printer Reference Overseas Affiliates Page Means Power ON. b means Power OFF Page Means Power ON. b means Power OFF Page Means Power ON. b means Power OFF Trademarks Safety During Operation Safety Information Iii Page Low-power mode Energy Save mode SpecificationsEnergy Star Program Manuals for Your Printer Manuals for Your Printer Symbols How to Read this Manual Table of Contents Moving and Transporting the Printer Specifications Cleaning the PrinterReplacing Consumables ConsumablesPage Exterior-Front View Guide to the Printer Paper Tray Bypass tray Exterior-Rear View Interior Operation Panel Turning On the Printer Turning the Printer On and OffTurning Off the Printer Ready Installing Options Memory Unit Type505 ⇒ P.9 Available Options Installing the Memory Unit Type505 Dimm For more information on Check the contents of the box for the following items Installing the Printer Hard Disk Type505 Press Enter to Initialize Disk InitializingPress Enter Move the printer to make install- ing space Installing the Paper Feed Unit Type305 Pull out the paper tray, and re- move the padding Remove both pieces of adhesive tapeRemove the ring attached to the red tag Place the printer on the paper feed unit Paper Types and Sizes Paper and Other Media Supported by this Printer B6 JIS Paper Sizes Metric version ⇒ P.27 Loading Paper in the Bypass Tray Paper Sizes Inch version ⇒ P.27 Loading Paper in the Bypass Tray Paper types and cautions Plain paper Precautions for Paper Adhesive labels Thick Paper OHP transparencies Paper not supported by this printer Printable Area Loading Paper Loading Paper in the Paper TrayLoad paper into the tray with the print side up Specifying paper size using the operation panel Printer SetupSET * Size TRAY1 * Size Open the bypass tray Loading Paper in the Bypass TraySlide the side guides Load paper until it stops with the print side down Sliding out the Output Tray Extender Bypass Tray SizePress Enter until Bypass Tray Size appears Error & Status Messages on the Operation Panel Troubleshooting ⇒ P.38 Removing Misfed Pa Tle. ⇒ P.53 Replacing Waste Toner Bottle and Charg Printer Doesnt Print Possible Cause Solutions If the printer is using the I/O timeout setting Terface cableNetwork Connection Windows NT4.0 Windows 95/98 Status Possible Causes, Descriptions, and Solutions Other Printing Problems Tions for Paper Ing the Charger Removing Misfed Paper Appears When the Message OpenMisfeed Appears Bypass tray When the Message Remove Tray AppearsOpen the paper exit cover Remove the misfed paper from inside of the printer Remove the misfed paper fromClose the paper exit cover Close the front cover Cleaning the Printer Cleaning the Friction PadCleaning the Charger Remove the cleaning brush from back of the front cover Cleaning the Dust-proofing glass TFWX280E Replacing Consumables Open the left coverSlide the lock lever up Hold the new toner cartridge Remove the protective sheet from the new toner cartridgeShake it with a horizontal motion About 10 times, as shown in the il- lustration Magenta Toner MaintenanceMagenta Toner Please Wait Replace Toner Magenta Turn off the printers power switch Replacing the Photoconductor UnitReplace PCU TFWX400E Turn on the printer’s power switch Replacing the Fuser Oil Bottle and Ozone FilterFuser OIL LOW ADD Fuser OIL Close the fuser oil bottle cover Remove the green cap from the new oil bottle Insert a new ozone filter into the printer Replacing the Waste Toner Bottle and Charger Waste Toner Almost Full Locks release, and the charg- er is lifted slightly Moving and Transporting the Printer Appendix Mainframe Specifications Dimensions Noise Emission Sound Power LevelWeight Warm-up Time Optional Equipment Options Toner Cartridge Consumables Other Consumables Service Life *1 Index