Manuals / Ricoh / Computer Equipment / Printer

Ricoh AP505 manual Remove the green cap from the new oil bottle, Close the fuser oil bottle cover

Models: AP505

1 80

Download 80 pages 57.58 Kb

Page 69

Replacing Consumables

RCAUTION:

•When accessing the inside of the machine, do not touch any sec- tions other than those specified in this manual. If you do, it might result in receiving a burn or inju- ry.

Important

❒There are three ozone filters in this printer. Two of them are set inside in the front, one of them is set in the rear. Be careful when replacing the ozone filters as the front side filter is a different shape from the rear side filter.

❒Disposal can take place at our au- thorized dealer or at appropriate collection sites.

❒Dispose of used ozone filters as general burnable refuse.

ATurn off the printer's power switch.

BReplace the oil bottle.

BOpen the fuser oil bottle cover of the printer.

TFWX090E

CRemove the used oil bottle

	from the printer carefully.
	from the printer carefully.	4
	D Insert the new oil bottle into	4
	D Insert the new oil bottle into
	the oil bottle case.

TFWX100E

ARemove the green cap from the new oil bottle.

Important

❒Hold the clear cap while turning the green cap. Do not remove the clear cap.

TFWX031E

EClose the fuser oil bottle cover.

Important

❒The fuser oil bottle cover should be kept closed.

CReplace the ozone filter on the back side of the printer.

A Remove	the	ventilator	hole
cover.
			TFWX960E

51

Image 69

Ricoh AP505 manual Remove the green cap from the new oil bottle, Close the fuser oil bottle cover

Contents

Printer Reference Overseas Affiliates Page Means Power ON. b means Power OFF Page Means Power ON. b means Power OFF Page Means Power ON. b means Power OFF Trademarks Safety During Operation Safety InformationIii Page Low-power mode Energy Save mode SpecificationsEnergy Star Program Manuals for Your Printer Manuals for Your PrinterSymbols How to Read this ManualTable of Contents Moving and Transporting the Printer Specifications Cleaning the PrinterReplacing Consumables ConsumablesPage Exterior-Front View Guide to the PrinterPaper Tray Bypass trayExterior-Rear View Interior Operation Panel Turning On the Printer Turning the Printer On and OffTurning Off the Printer ReadyInstalling Options Memory Unit Type505 ⇒ P.9 Available OptionsInstalling the Memory Unit Type505 Dimm For more information on Check the contents of the box for the following items Installing the Printer Hard Disk Type505Press Enter to Initialize Disk InitializingPress Enter Move the printer to make install- ing space Installing the Paper Feed Unit Type305Pull out the paper tray, and re- move the padding Remove both pieces of adhesive tapeRemove the ring attached to the red tag Place the printer on the paper feed unitPaper Types and Sizes Paper and Other Media Supported by this PrinterB6 JIS Paper Sizes Metric version⇒ P.27 Loading Paper in the Bypass Tray Paper Sizes Inch version ⇒ P.27 Loading Paper in the Bypass Tray Paper types and cautions Plain paper Precautions for PaperAdhesive labels Thick PaperOHP transparencies Paper not supported by this printer Printable Area Loading Paper Loading Paper in the Paper TrayLoad paper into the tray with the print side up Specifying paper size using the operation panel Printer SetupSET * Size TRAY1 * SizeOpen the bypass tray Loading Paper in the Bypass TraySlide the side guides Load paper until it stops with the print side downSliding out the Output Tray Extender Bypass Tray SizePress Enter until Bypass Tray Size appears Error & Status Messages on the Operation Panel Troubleshooting⇒ P.38 Removing Misfed Pa Tle. ⇒ P.53 Replacing Waste Toner Bottle and Charg Printer Doesnt Print Possible Cause SolutionsIf the printer is using the I/O timeout setting Terface cableNetwork Connection Windows NT4.0 Windows 95/98Status Possible Causes, Descriptions, and Solutions Other Printing ProblemsTions for Paper Ing the Charger Removing Misfed Paper Appears When the Message OpenMisfeed Appears Bypass trayWhen the Message Remove Tray AppearsOpen the paper exit cover Remove the misfed paper from inside of the printer Remove the misfed paper fromClose the paper exit cover Close the front cover Cleaning the Printer Cleaning the Friction PadCleaning the Charger Remove the cleaning brush from back of the front cover Cleaning the Dust-proofing glassTFWX280E Replacing Consumables Open the left coverSlide the lock lever up Hold the new toner cartridge Remove the protective sheet from the new toner cartridgeShake it with a horizontal motion About 10 times, as shown in the il- lustrationMagenta Toner MaintenanceMagenta Toner Please Wait Replace Toner MagentaTurn off the printers power switch Replacing the Photoconductor UnitReplace PCU TFWX400E Turn on the printer’s power switch Replacing the Fuser Oil Bottle and Ozone FilterFuser OIL LOW ADD Fuser OIL Close the fuser oil bottle cover Remove the green cap from the new oil bottleInsert a new ozone filter into the printer Replacing the Waste Toner Bottle and Charger Waste Toner Almost FullLocks release, and the charg- er is lifted slightly Moving and Transporting the Printer AppendixMainframe SpecificationsDimensions Noise Emission Sound Power LevelWeight Warm-up TimeOptional Equipment Options Toner Cartridge ConsumablesOther Consumables Service Life *1Index