Other Printing Problems
Other Printing Problems
Status | Possible Causes, Descriptions, and Solutions |
|
| |
|
|
|
| |
Image is printed on the re- | The paper in the paper tray is upside down. |
|
| |
verse side of the paper. | • Standard Tray (Tray 1) |
|
| |
|
|
| ||
| Load paper with the print side up. |
|
| |
| • Bypass Tray |
|
| |
| Load paper with the print side down. |
|
| |
| • Optional Paper Feed Unit (Tray 2, Tray 3) |
|
| |
| Load paper with the print side up. |
|
| |
|
|
|
| |
Paper misfeeds occur fre- | Check the paper size settings. The size specified with |
|
| |
quently. | the paper size dial might be different from the actual |
|
| |
4 | ||||
| paper size. Make the correct dial setting. ⇒ P.25 “Load- |
| ||
|
| |||
| ing Paper in the Paper Tray” |
|
| |
|
|
|
| |
| Check if the paper tray is set correctly. If not, set it cor- |
|
| |
| rectly. ⇒ P.25 “Loading Paper in the Paper Tray” |
|
| |
|
|
|
| |
| Paper is not loaded correctly in the paper tray. Remove |
|
| |
| the paper from the tray and reload it correctly. ⇒ P.25 |
|
| |
| “Loading Paper in the Paper Tray” |
|
| |
|
|
|
| |
| Check the paper type settings. The type of paper set |
|
| |
| with the printer driver might be different from the ac- |
|
| |
| tual paper or media type. Make the correct paper or |
|
| |
| media type setting. |
|
| |
|
|
|
| |
| You might use paper not supported by this printer. Use |
|
| |
| the appropriate type of paper. ⇒ P.20 “Precautions for |
|
| |
| Paper” |
|
| |
|
|
|
| |
Multiple pages are fed | Clean the friction pad, if it is dirty. ⇒ P.42 “Cleaning the |
|
| |
through the printer at once. | Friction Pad” |
|
| |
|
|
|
| |
Operation panel error mes- | After removing misfed paper, open the front cover of |
|
| |
sage stays on after removing | your printer and then close it. ⇒ P.38 “Removing Misfed |
|
| |
the misfed paper. | Paper” |
|
| |
|
|
|
| |
It takes too much time to | The data is so large or complex that it takes time to pro- |
|
| |
print the first page. | cess it. If the Data In indicator is blinking, the data pro- |
|
| |
| cessing is being done. Just wait until it resumes. |
|
| |
|
|
|
| |
| The Energy Save mode might be enabled. In the Ener- |
|
| |
| gy Save mode, it takes time for the machine to warm |
|
| |
| up. |
|
| |
|
|
|
|
35
