Sliding out the Output Tray Extender | Ricoh AP505 instruction

Paper and Other Media

Specifying paper size using the operation panel

Use the following procedure to speci- fy the paper size from the printer's operation panel after loading paper into the bypass tray.

A Press {Menu}.
3	On Line
3
	Menu	Cancel	Enter
Power	Error	Data In
			TFWS020E
B Use {U}{T} to display “PRINT-
ER SETUP”.

PRINTER SETUP

Sliding out the Output Tray Extender

If you load paper of A4L or 81/2" × 11"L or larger, slide out the output tray extender.

Important

❒Do not place the rear end of the printer near a wall or touch it with barehands. This area can become extremely hot.

TFWX440E

CPress {Enter} until “BYPASS TRAY SIZE” appears.

BYPASS TRAY SIZE

8.5x11 *

DUse {U} {T} to select the paper size you have specified for the pa- per tray, and then press {Enter}.

BYPASS TRAY SIZE 8x13

EPress {Menu}.

The setting becomes effective.

FPress {Menu}.

The normal display screen ap- pears.

READY

Note

❒After printing, return the output tray extender to its original posi- tion.

28

Image 46

Ricoh AP505 manual Sliding out the Output Tray Extender, Press Enter until Bypass Tray Size appears

Contents

Printer Reference Overseas Affiliates Page Means Power ON. b means Power OFF Page Means Power ON. b means Power OFF Page Means Power ON. b means Power OFF Trademarks Safety Information Safety During Operation Iii Page Specifications Low-power mode Energy Save modeEnergy Star Program Manuals for Your Printer Manuals for Your Printer How to Read this Manual Symbols Table of Contents Replacing Consumables Cleaning the PrinterMoving and Transporting the Printer Specifications ConsumablesPage Guide to the Printer Exterior-Front View Bypass tray Paper Tray Exterior-Rear View Interior Operation Panel Turning Off the Printer Turning the Printer On and OffTurning On the Printer Ready Installing Options Available Options Memory Unit Type505 ⇒ P.9 Installing the Memory Unit Type505 Dimm For more information on Installing the Printer Hard Disk Type505 Check the contents of the box for the following items Initializing Press Enter to Initialize DiskPress Enter Installing the Paper Feed Unit Type305 Move the printer to make install- ing space Remove the ring attached to the red tag Remove both pieces of adhesive tapePull out the paper tray, and re- move the padding Place the printer on the paper feed unit Paper and Other Media Supported by this Printer Paper Types and Sizes Paper Sizes Metric version B6 JIS ⇒ P.27 Loading Paper in the Bypass Tray Paper Sizes Inch version ⇒ P.27 Loading Paper in the Bypass Tray Precautions for Paper Paper types and cautions Plain paper Thick Paper Adhesive labels OHP transparencies Paper not supported by this printer Printable Area Loading Paper in the Paper Tray Loading PaperLoad paper into the tray with the print side up SET * Size Printer SetupSpecifying paper size using the operation panel TRAY1 * Size Slide the side guides Loading Paper in the Bypass TrayOpen the bypass tray Load paper until it stops with the print side down Bypass Tray Size Sliding out the Output Tray ExtenderPress Enter until Bypass Tray Size appears Troubleshooting Error & Status Messages on the Operation Panel ⇒ P.38 Removing Misfed Pa Tle. ⇒ P.53 Replacing Waste Toner Bottle and Charg Possible Cause Solutions Printer Doesnt Print Terface cable If the printer is using the I/O timeout settingNetwork Connection Windows 95/98 Windows NT4.0 Other Printing Problems Status Possible Causes, Descriptions, and Solutions Tions for Paper Ing the Charger Removing Misfed Paper Misfeed Appears When the Message OpenAppears Bypass tray Tray Appears When the Message RemoveOpen the paper exit cover Remove the misfed paper from Remove the misfed paper from inside of the printerClose the paper exit cover Close the front cover Cleaning the Friction Pad Cleaning the PrinterCleaning the Charger Cleaning the Dust-proofing glass Remove the cleaning brush from back of the front cover TFWX280E Open the left cover Replacing ConsumablesSlide the lock lever up Shake it with a horizontal motion Remove the protective sheet from the new toner cartridgeHold the new toner cartridge About 10 times, as shown in the il- lustration Magenta Toner Please Wait MaintenanceMagenta Toner Replace Toner Magenta Replacing the Photoconductor Unit Turn off the printers power switchReplace PCU TFWX400E Replacing the Fuser Oil Bottle and Ozone Filter Turn on the printer’s power switchFuser OIL LOW ADD Fuser OIL Remove the green cap from the new oil bottle Close the fuser oil bottle cover Insert a new ozone filter into the printer Waste Toner Almost Full Replacing the Waste Toner Bottle and Charger Locks release, and the charg- er is lifted slightly Appendix Moving and Transporting the Printer Specifications Mainframe Weight Noise Emission Sound Power LevelDimensions Warm-up Time Optional Equipment Options Consumables Toner Cartridge Service Life *1 Other Consumables Index