Kodak Picture Frame 13, Still Picture Mode, Slide Show Mode

4
13
Still Picture Mode
To display a single picture, put your Smart Picture Frame in Still Picture Mode.
1 Press the Menu button.
2Select Slide Show. Press OK.
3Use the arrow buttons to select Pause Show. Press OK.
4Use the arrow buttons to select Accept Setting. Press OK.
The picture on the frame is displayed until you:
mChange the Slide Show settings.
mUse the arrow buttons to m ove to a different p icture.
Slide Show Mode
In Slide Show Mode, the Smart Picture Frame continually cycles through all of
the pictures in the frame. If a COMPACTFLASH Card is inserted, pictures on the
card are displayed aft er pictures in the frame memory.
1 Press the Menu button.
2Select Slide Show. Press OK.
3Use the arrow buttons to select the time you would like each picture to
remain on the screen. Press OK.
4Select Accept Setting. Press OK.
The slide show runs as programmed until you change the settings. The
slide show setting do es not apply to pi ctures on a card.
SmartPictureFrameNon-Networked.book Page 13 Tuesday, October 9, 2001 4:36 PM