Fault Diagnosis
CustomerFaultDiagnosis
The troubleshooting information below gives details on what you can do as a user if you encounter problems with the shower. If this information does not fix the problem, contact the installer for advice.
Read the Important Safety Information section first and refer to the appliance diagram.
WARNING! There are no
Malfunction | Cause | Remedy |
|
|
|
Shower is too hot | The incoming water is | Turn the power knob to |
during the summer. | warmer in the summer, | Medium and adjust the |
| so the shower power | temperature knob until the |
| setting is too high. | desired temperature is |
|
| reached. |
|
|
|
Shower is too hot. | The handset sprayplate | Regularly clean the handset |
| is blocked. | sprayplate. Refer to the |
|
| Maintenance section of the |
|
| handset manual. |
|
|
|
Turning the | The handset sprayplate | Remove and clean the |
temperature knob | is blocked. | handset sprayplate. Refer to |
does not affect the |
| the Maintenance section of |
water temperature. |
| the handset manual. If the |
|
| fault persists, contact the |
|
| shower installer. |
The water continues | Broken diaphragm. | Contact your installer to |
to flow when the |
| replace the flow valve |
double pole switch |
| assembly. |
is turned off. |
|
|
|
|
|
25