concealed cable or the device’s mains lead. Contact with an electrical lead or cable means that the metal parts of the device may also be- come live and this can result in electric shock.
JAlways keep the device clean, dry and free of oil or grease. Dirty devices increase the risk of injury (e.g. by slipping). You will work better and more safely with clean cutting tools.
QOriginal accessories / attachments
JUse only the accessories and attachments de- tailed in the operating instructions. The use of inserted tools or accessories other than those recommended in the operating instructions could lead to you suffering an injury.
Safety advice / Preparing for use
QPreparing for use
QRouter bit set / scope of application
Router bits (also referred to as router cutters) are available in a wide range of qualities and designs to suit the type of cutting and intended application. The following descriptions give you an indicative overview (without liability) of the scope of applica- tion of different router bits. The included router bit set contains router cutters for the most common routing tasks.
QCaution utility services!
JDanger!
Ensure that you do not strike electrical cables, gas or water pipes when you are working with an electrical power tool. Check a wall using a suitable detector before you drill or cut slots.
Flush trim bit with bearing:
Particularly suitable for flush trimming and chamfer- ing laminated boards, wooden beams and edgings (plastic or veneer) in furniture making and shop fitting. The bearing allows the bit guide itself directly along the workpiece. The most common applications of this bit include rounding the edges of window frames, cupboards, tabletops, shelves and mantelpieces.
QHave you understood everything?
JOnce you have made yourself familiar with this general safety advice for electrical power tools, and with the help of the device’s operating in- structions you now know about all the functions of and how to handle your electrical power tool, you are finally in a position to start work. Ob- serving the instructions and advice will maximise your safety while working with the device.
Corner rounding bit with bearing:
Corner rounding bits are suitable for profiling edges in frames and framework, especially working with solid woods, such as spruce, beech, oak and alder.
Slot cutter, with two cutting edges: Particularly suitable for solid wood, boards, e.g. chipboard and MDF (medium density wood fibre boards) and for plastics. Suitable for milling plane
GB 11
