User Service TabTop Adjustment—Allows the vertical print position to be finely adjusted. Left Adjustment—Allows the horizontal printer position to be finely adjusted. Transfer Power—Set the 2nd Transfer voltage for the Media type. Service's Choice
GDI Timeout—Specifies the amount of time until communication with the printer times out.
Energy Save—Specifies whether or not the Energy Save mode is enabled. The length of time until the machine enters Energy Save mode can be specified from the Panel tab.
" This menu is displayed only on the Americas model.
Flicker—Set fuser heater power.
Image Adj Param—Use when print quality is reduced in environments such as high altitudes.
Print Pattern 1, Print Pattern 2—Prints a test pattern so the print result can be checked.
A black-and-white test pattern can be printed with "Print Pattern 1", and a color test pattern can be printed with "Print Pattern 2".
Download—Downloads the current printer settings and displays them in the utility.
Upload—Sends the current utility settings to the printer.
Closing the Remote Panel Utility
To close the Remote Panel Utility, right-click the Remote Panel Utility icon in the Windows notification area (right end of the taskbar), and then choose Exit.
" When the Close button in the lower-right corner of the Remote Panel Utility window is clicked, the window is closed, and the utility remains miniaturized as an icon in the notification area. (The utility is not closed.) Double-click the icon to open the Remote Panel Utility window again.
" Wait at least 5 seconds before opening the Remote Panel Utility again after it has been closed.
3-4 | Closing the Remote Panel Utility |