Kramer Electronics FC-5 instruction

5.5Assigning the Translation List Driver Commands

Assign the configured translation list commands driver to the FC-5. The list is configured to the Translation Set selected by the DIP-switches at the time of the download. This process can take several minutes. During the process the “Assign” button of the Kramer FC-5Manager software application flashes, and the STATUS LED of the FC-5unit also flashes. At the end of this process the following message appears: “Assigned Successfully!”

FC-5 - Configuring the Kramer FC-5 Manager Software

13

Image 16

Kramer Electronics FC-5 user manual Assigning the Translation List Driver Commands

Contents

FC-5 Page Figures Introduction Getting Started Achieving the Best Performance Overview Feature Function Your FC-5 Protocol Translator Feature Configuring the Kramer FC-5 Manager Software Installing and Running the Kramer FC-5 Manager Software Using the Translation List Window Translation List Window Entering Data in the New Command Window Editing Data in the Command Window Erasing a Command from the Command Translation List Window Connecting a PC Config Port Connecting a PC Setting the DIP-Switches To PC Assigning the Translation List Driver Commands Using the FC-5 Transmitting Commands via a PC or Remote Controller Transmitting Commands via the Contact Closure Transmitting Commands via the Contact closure Transmitting Commands via the Relays Transmitting Commands via the Relays Transmitting Commands via the Contact Closure and Relays Transmitting Commands via the Contact closure and Relays Upgrading the FC-5 Firmware Connecting the PC to the RS-232 Config PortDownloading from the Internet Upgrading Firmware JTG Sender Window Technical Specifications RK-3T 19 rack adapter Only the first purchase customer may enforce this warranty Safety Warning