Kramer Electronics Using the FC-5, Transmitting Commands via a PC or Remote Controller

6 Using the FC-5

You can use your FC-5to transmit commands via the:

•PC or remote controller, see Section 6.1

•Contact closure, see Section 6.2

•Relays, see Section 6.3

•Contact closure and relays, see Section 6.4

6.1Transmitting Commands via a PC or Remote Controller

You can use your FC-5to transmit commands via a PC or remote controller:

Figure 13: Transmitting Commands via a PC or Remote Controller

Connect a PC or Remote Controller to the COM1 port and a controlled unit is connected to the COM2 port. In this example, the PC or Remote Controller transmits user-defined commands to the Kramer switcher

14 FC-5 - Using the FC-5