Kramer Electronics FC-5 user manual Transmitting Commands via the Contact Closure

6.2Transmitting Commands via the Contact Closure

You can use the FC-5to transmit commands via the contact closure (see also Section 6.4):

Figure 14: Transmitting Commands via the Contact closure

The INPUTS contact closure remote control pins let you temporarily route an input to the output by momentarily attaching an input to the GND (Ground) pin (do not connect more than one PIN to the Ground PIN at the same time). In this example INPUT 3 is routed to the output, by temporarily attaching PIN 3 to PIN GND, and a Kramer switcher is connected to the COM2 port

FC-5 - Using the FC-5 15