To perform a hard reset

Important: When you do a hard reset, all entries stored in the phone are erased. You can restore previously synchronized data using a HotSync operation. Perform a hard reset only as a last resort if a soft reset has not solved the problem or you are instructed to do so by the Kyocera Customer Care Center.

1.With the flip open, turn the Kyocera 7135 smartphone over. Open the battery door on the back of the phone.

2.Press and hold down the backlight button on the keypad of the phone. Keep holding down the backlight button as you use the stylus to press the reset pin on the right side of the battery. Wait a moment and release only the reset pin.

3.When the Palm logo appears, release the backlight key. The following message appears:

Erase all data?

YES - “up” button

NO - any other button

4.Press the key below the screen to complete the hard reset and delete your data. Press any other key to cancel the hard reset and keep your data.

User’s Guide for the Kyocera 7135 phone

75

Page 93
Image 93
Kyocera 7100 Series, 7135 manual To perform a hard reset