Kyocera E3100 manual Sound and Touch, Set Ringer Mode, Volume, Set Power On Sound

Sound and Touch

From Sound and Touch, you can modify the following features.

Set Ringer Mode

Your phone is set to make sounds when you receive calls, press keys, navigate through menus, and receive alerts (such as new messages). You can silence all sounds and set the phone to vibrate or to light up when you receive calls and alerts.

From Ringer Mode, select one of the following:

•Normal Sounds rings for the incoming call or alert (in effect, returning the phone to a non-silent mode).

•Vibrate Only vibrates for the duration of the incoming call or other alerts.

•Vibrate Then Ring vibrates for the first ten seconds and then rings for the remainder of the incoming call alert.

•Lights Only lights up for the duration of the incoming call or other alerts.

You can also use the Volume key to activate Vibrate Only mode.

Note: The phone rings when attached to an external power source (such as a charger), even if all sounds have been silenced.

Volume

From Volume, you can modify the following features.

Set Ringer Volume

1.From Ringer, use the slider control to adjust the volume.

2.Touch Set to save.

Set Speakerphone Volume

1.From Speakerphone, use the slider control to adjust the volume.

2.Touch Set to save.

Set Earpiece Volume

1.From Earpiece, use the slider control to adjust the volume.

2.Touch Set to save.

Set Alarm Volume

1.From Alarm, use the slider control to adjust the volume.

2.Touch Set to save.

Set Ringer

From Ringers, assign a sound from your Gallery as your default ringer. To preview a sound, touch the icon next to the name.

Set Power On Sound

From Power On Sound, select a sound to play when your phone powers on. To preview a sound, touch the icon next to the name.

50 Sound and Touch