Format Memory Card

1.Insert memory card into correct slot.

2.From Format Card, touch Yes.

Note: Formatting will erase all current information on the memory card.

Set USB Mode

You can set your phone to transfer files to and from a computer.

From USB Mode, select one of the following:

Mass Storage to use the Micro-USB jack with a USB cable to transfer files.

COM to use the Micro-USB jack for charging only.

Connect to TTY Device

You can connect the phone to a teletype (TTY) device (sold separately) for the hearing impaired.

Note: Enable TTY only when using the phone with a TTY device.

1.Connect the TTY device to your phone.

2.From TTY Device, touch OK to clear the notification.

3.Select one of the following:

TTY Off disables TTY devices.

TTY On enables TTY devices.

TTY On + Talk enables TTY devices and voice carry over.

TTY On + Hear enables TTY devices and hearing carry over.

Note: You can also enter ##889 with the Dialer and touch TTY to enable TTY.

Connect to Hearing Aid Device

1.Connect the T-coil hearing aid device (sold separately) to your phone.

2.From T-coil Hearing Aid, touch OK to clear the notification.

3.Select Enabled to activate the hearing aid feature.

Enable Auto-Answer

From Auto Answer, select Enabled. The

phone automatically answers after five seconds with a headset attached.

Set Com Port Speed

From Com Port Speed, select a data rate at which your phone connects to a laptop or PC.

Check with your service provider for details.

Bluetooth

Use Bluetooth to configure your devices. See “Bluetooth” on page 68 for more information.

Network

From Network, you can modify the following features.

Enable Roaming Service Alert

Use this setting if you want the phone to alert you when you roam outside of your home service area.

User Guide

55

Page 55
Image 55
Kyocera E3100 manual Bluetooth, Network