Land Pride
Section 4 Maintenance and Lubrication
Maintenance Schedule
| Service at Intervals Indicated | Weekly or 50 Hours | Monthly or 100 Hours | Annually or 500 Hours |
|
| Verify Safety Start Interlock System |
| Daily |
| |
| Visually Inspect Unit for loose hardware |
| Daily |
| |
| and/or damaged parts |
|
|
|
|
| Visually Inspect Tires |
| Daily |
| |
| Check Oil Level, Engine (1) |
| Daily or every 4 hours |
| |
| Clean Air Intake Screen |
| Daily or every 4 hours |
| |
| Check Fuel Level |
| Daily |
| |
| Blades - Sharpen & Securely Fastened |
| Daily |
| |
| Discharge Chute - Securely In Place & |
| Daily |
| |
| In Lowest Position |
|
|
|
|
| Replace Remote Air Cleaner paper |
| As needed |
| |
| element (6) |
|
|
|
|
| Grease Deck Idler | X |
|
|
|
| Grease Deck Pusher Arms | X |
|
|
|
| Grease Pump Idler | X |
|
|
|
| Grease Deck Height Pivots | X |
|
|
|
| Grease Gauge Wheel Bearings | X |
|
|
|
| Change Engine Oil & Filter (1) (4) | X |
|
|
|
| Clean Cylinder And Head Fins (5) | X |
|
|
|
| Check Battery Connections | X |
|
|
|
| Check Tire Pressure With A Gauge | X |
|
|
|
| Check Hydraulic Oil Level | X |
|
|
|
| Clean Engine Exterior (5) | X |
|
|
|
| Clean And |
| X |
|
|
| Check Pump Belt and Deck Belt |
| X |
|
|
| for Tension and Condition (7) |
|
|
|
|
| Check Fuel And Hydraulic Lines (8) |
| X |
|
|
| Check Fuel Valve And Grommet (8) |
| X |
|
|
| Change Fuel Filter |
|
| X |
|
| Clean Or Replace Hydraulic Fill Cap |
|
| X |
|
| Change Hydraulic Filter And Oil (3) |
|
| X |
|
| Grease Deck Spindle Housings |
|
| X |
|
| Replace Spark Plugs |
|
| X |
|
|
|
|
|
|
|
NOTES:
1.Initial oil change is after 5 hours of operation. Thereafter, change oil after every 40 hours of operation. Change more often under dusty or dirty conditions and during hot weather periods.
2.Torque initially and after first 2 hours of operation.
3.Perform initial hydraulic filter change after 50 hours (one week) of operation.
4.Change engine oil filter per the engine manufacturer’s recommendations. Refer to Engine Owner’s Manual.
5.Refer to Engine Owner’s Manual.
6.Service more often under dusty or dirty conditions. Use caution when servicing to prevent dust contamination in the engine. Do not clean filter element. Replace with a new one.
7.Inspect every 100 hours and replace if worn or cracking is noticed. Otherwise, replace every 1000 hours or 2 years whichever comes first.
8.Check fuel line hoses, fuel valve and grommet for any cracks or leaks.
03/11/03 | Z52®, Z60® & Z72® Zero Turning Radius Mowers | 31 |
