Land Pride Z60 Accu-VacAssembly, Refer to -9 on page, Assembly and Set-Up, Mower Deck Preparation

Land Pride

Section 1 Assembly and Set-Up

Accu-Vac Assembly

Refer to Figure 1-9on page 12

Land Pride offers as an option an Accu-Vac Collection System designed to collect mower clippings into two 30 gallon rubber containers mounted on the back of the mower.

NOTE: Accu-Vac Collection System cannot be mounted on Accu-Z mowers manufactured with Honda engines. Use only with Kawasaki engines.

!WARNING!

Do not operate Accu-Vac System without remote air cleaner set- up or engine damage may occur.

Mower Deck Preparation

Refer to Figure 1-6:

Park the Accu-Z mower on a flat surface. Shut off the ignition switch and remove the key from the switch. Disconnect the negative battery cable.

Before the Accu-Vac can be installed, the right side pulley cover (4) and discharge chute assembly (1) must be removed. Loosen the tensioner for the blade belt and remove pulley (7). Parts 2, 3, 6 and 8 will be used to assemble Accu-Vac.

NOTE: Retain all other parts as they will be re-installed when the Accu-Vac is removed.

!WARNING!

Do not operate mower without deflector chute or Accu-Vac in place.

19907

Chute, Pulley and Pulley Cover Removal

Figure 1-6

03/11/03 Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M 9