Land Pride ZRP52, ZRP44 manual Nut Deck Lift Threaded Rod

Table of Contents

Section 3 Adjustments

Land Pride

6.Refer to Figure 3-17 & Figure 3-18. Loosen all nuts on the deck lift threaded rods, and the hardware on the adjuster (on the right front), until all the deck lift chains are loose, and the deck is sitting tightly on all four blocks

.

Nut	Deck Lift	Nut
	threaded Rod

21076		Chain
	Deck Level Adjustment
	Figure 3-17

5/16” Bolt

Jam Nut

Adjuster

21056Hardware

Deck Level Adjustment

Figure 3-18

Foot Pedal

Nuts

21057

Deck Level Adjustment Foot Pedal

Figure 3-19

8.Start the leveling process on the left front of the mower.

9.Refer to Figure 3-20. Set the amount of threads protruding on the deck lift rod from the lift block at approximately 1”

.

Lift Block

1”

		Deck Lift Rod
	1”
			Deck Lift Assist
				Springs
21075

Left Rod Protruding Threads

Figure 3-20

7.Refer to Figure 3-19. Loosen the two nuts on the front of height indicator so that the foot pedal is free.

10.Jam both nuts against the lift block.

11.Push or pull on the deck lift foot pedal until the chain on the left front just becomes tight, making sure that the deck stays tight against the 3” block.

20 ZRP44 & ZRP52 Zero Turning Radius Mowers 356-117M 7/14/08