Land Pride | Table of Contents |
|
| ||
| Section 4 Maintenance and Lubrication |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Maintenance Schedule |
|
| |
| Service at Intervals Indi- | Weekly or | Monthly or | Annually or |
|
| cated | every 50 Hours | every 100 Hours | every 500 Hours |
|
| Verify Safety Start Interlock System |
| Daily |
|
|
| Visually Inspect Unit for loose hardware |
| Daily |
|
|
| and/or damaged parts |
|
|
|
|
| Visually Inspect Tires |
| Daily |
|
|
| Check Oil Level, Engine (1) |
| Daily or every 4 hours |
|
|
| Clean Air Intake Screen (5) |
| Daily or every 4 hours |
|
|
| Clean Oil Heat Exchanger (5) |
| Daily or every 4 hours |
|
|
| Check Fuel Level |
| Daily |
|
|
| Blades - Sharpen & Securely Fastened |
| Daily |
|
|
| Discharge Chute - Securely In Place & |
| Daily |
|
|
| In Lowest Position |
|
|
|
|
| Replace Remote Air Cleaner paper |
| As needed |
|
|
| element (5) |
|
|
|
|
| Grease Deck Pusher Arms | X |
|
|
|
| Grease Pump Idler | X |
|
|
|
| Grease Deck Height Pivots | X |
|
|
|
| Grease Gauge Wheel Bearings | X |
|
|
|
| Change Engine Oil & Filter (1) (4) | X |
|
|
|
| Clean Cylinder And Head Fins (8) | X |
|
|
|
| Check Battery Connections | X |
|
|
|
| Check Tire Pressure With A Gauge | X |
|
|
|
| Check Hydraulic Oil Level | X |
|
|
|
| Clean Engine Exterior (8) | X |
|
|
|
| Clean And |
| X |
|
|
| Check Pump Belt and Deck Belt |
| X |
|
|
| for Tension and Condition (6) |
|
|
|
|
| Check Fuel And Hydraulic Lines (7) |
| X |
|
|
| Check Fuel Valve And Grommet (7) |
| X |
|
|
| Tighten Lug Nuts On Wheels (2) |
| X |
|
|
| Change Fuel Filter |
|
| X |
|
| Clean or Replace Hydraulic Fill Cap |
|
| X |
|
| Change Hydraulic Filter And Oil (3) |
|
| X |
|
| Replace Spark Plugs |
|
| X |
|
|
|
|
|
|
|
NOTES:
1.Initial oil change is after 5 hours of operation. Thereafter, change oil after every 40 hours of operation. Change more often under dusty or dirty conditions and during hot weather periods.
2.Torque initially and retorque after first 2 hours of operation.
3.Perform initial hydraulic filter change after 50 hours (one week) of operation.
4.Change engine oil filter per the engine manufacturer’s recommendations. Refer to Engine Owner’s Manual for recommendations and other maintenance items.
5.Service more often under dusty or dirty conditions. Use caution when servicing to prevent dust contamination in the engine. Do not clean filter element. Replace with a new one.
6.Inspect every 100 hours and replace if worn or cracking is noticed. Otherwise, replace every 1000 hours or 2 years whichever comes first.
7.Check fuel line hoses, fuel valve and grommet for any cracks or leaks.
8.Refer to Engine Owner’s Manual.
7/14/08 | ZRP44 & ZRP52 Zero Turning Radius Mowers | 23 |
