Lanier GX3050 manual Edge-Edge Print

Making Printer Settings

Default: 8 1/2 x 11 Copies

Specify the number of pages to print.

This setting is disabled if the number of pages to print is specified by the printer driver.

z1-999 Edge-Edge Print

Specify whether to print on the paper as fully as possible.

zOff

zOn

Default: Off

Duplex

Specify whether or not to print on both sides of a sheet.

zOff

zShort Edge Bind

zLong Edge Bind Default: Off

Blank Pages

Specify whether or not to print blank pages.

zPrint

zDo not Print

Default: Print

Tray Switching

You can set to switch the paper tray.

zOff

zOn

Default: Off

Uni-direct.Prt.

Specify whether to print unidirectionally or bidirectionally.

Unidirectional printing produces higher quality print, but bidirectional printing is faster.

zEnv.Selector:On

Printing is done unidirectionally or bidirectionally according to the envelope selector position. If the envelope selector is set to the rear position, printing is done unidirectionally.

If the envelope selector is set to the forward position, printing is done unidirectionally or bidirection- ally according to the paper type.

zAuto Detect

Printing is done unidirectionally or bidirectionally according to the paper type, regardless of the enve- lope selector position.

zAlways

Printing is always done unidirectionally, regardless of the envelope selector position. Default: Env.Selector:On

63