Lanier GX3050 manual Installing the PCL or Rpcs Raster Printer Driver IPP, 139

Preparing for Printing

After reading the agreement, click [I accept the agreement.], and then click [Next >].

5.Click [Next >].

6.Click [Connected via LAN].

7.Select the printer model you want to use.

The printer name can be changed in the [Change settings for 'Printer Name'] box.

8.Double-click the printer name to display the printer settings.

The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer model, and port.

9.Click [Port:], and then click [Add].

10.Click [SmartDeviceMonitor], and then click [OK].

11.Click [TCP/IP], and then click [Search]. A list of printers using TCP/IP appears.

12.Select the printer you want to use, and then click [OK].

Only printers that respond to a broadcast from the computer appear. To use a printer not listed here, click [Specify Address], and then enter the IP address or host name of the printer.

Under Windows 98/Me, you cannot add an IP address partially similar to the one already used. For exam- ple, if "192.168.0.2" is in use, "192.168.0.2xx" cannot be used. Similarly, if "192.168.0.20" is in use, "192.168.0.2" cannot be used.

13.Check that the port of the selected printer is displayed in [Port:].

14.Select the [Default Printer] check box to configure the printer as default.

15.Click [Continue]. Installation starts.

16.Select whether or not to open the Status monitor automatically.

17.Click [Next >].

18.Click [Finish] in the installation completion dialog box.

A message about restarting the computer may appear. Restart the computer to complete installation.

zA message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, install using [Add Printer].

Installing the PCL or RPCS Raster Printer Driver (IPP)

zTo install printer driver under Windows 2000/XP Professional, Windows Server 2003, and Windows NT 4.0, you must have an account that has Manage Printers permission. For this, log on as an Administrators or Power Users group member.

1.Quit all applications currently running.

2.Insert the CD-ROM into the CD-ROM drive. The installer starts.

139