Lantronix XSENSO 21A2 manual To Configure Terminal Block Power Alarm Settings, Snmp Trap Settings

13: Action Settings

	Table 13-8 SNMP Trap Settings
SNMP Settings	Description
Add an Action	Select SNMP Trap for the alarm or report.
(drop-down menu)
State	Check to enable or disable:
	 Introduce additional SNMP Trap configuration fields when enabled.
Reporting	Check the types of reporting to include:
	 Serial Number
	 System Long Name
	 Terminal Block
	 Barrel Connector
	 Analog Input 1
	 Analog Input 2
	 Analog Output 1 (for xSenso 21A2 only)
	 Analog Output 2 (for xSenso 21A2 only)
	 Relay Output 1 (for xSenso 21R2 only)
	 Relay Output 2 (for xSenso 21R2 only)
	Note: Your reporting selections made here will apply for all the connections you
	make.
Reminder Interval	Specify how long to wait in minutes before an SNMP Trap is sent to the remote
	host. Blank the display field to disable reminders. Data will only be sent once by
	default.

To Configure Terminal Block Power Alarm Settings

Using Web Manager

To configure terminal block power alarm, go to the Setup tab/page, click Action in the menu, and select Terminal Block Power Alarm from the drop-down menu.

Using the CLI

To enter the terminal block power alarm command level: enable -> config -> action -> terminal block power alarm

Using XML

Include in your file: <configgroup name = "action" instance = "Terminal Block Power Alarm">

To Configure Barrel Connector Power Alarm Settings

Using Web Manager

To configure barrel connector power alarm, go to the Setup tab/page, click Action in the menu, and select Barrel Connector Power Alarm from the drop-down menu.

Using the CLI

To enter the barrel connector power alarm command level: enable -> config -> action -> barrel connector block power alarm

xSenso User Guide 71