Lantronix XSENSO 21A2 manual Icmp Settings, To Configure Icmp Network Stack Settings, ARP Settings

		17: Maintenance and Diagnostics Settings
ICMP Settings
	Table 17-5 ICMP Network Stack Settings
Protocol Stack		Description
ICMP Settings
State		The State selection is used to turn on/off processing of ICMP messages.
		This includes both incoming and outgoing messages. Choose Enabled or
		Disabled.

To Configure ICMP Network Stack Settings

Using Web Manager

To configure ICMP protocol settings, go to the Admin tab/page, click Protocol Stack in the menu and select ICMP.

Using the CLI

To enter the command level: enable -> config -> icmp

Using XML

Include in your file: <configgroup name=”icmp”>

ARP Settings

	Table 17-6 ARP Network Stack Settings
Protocol Stack		Description
ARP Settings
IP Address		Enter the IP address to add to the ARP cache.
MAC Address		Enter the MAC address to add to the ARP cache.
Remove		Click the Remove link beside a specific address to remove it.
Remove All		Click the Remove All link underneath all listed addresses to remove all the
		addresses.

To Configure ARP Network Stack Settings

Using Web Manager

To configure ARP protocol settings, go to the Admin tab/page, click Protocol Stack in the menu and select ARP.

Using the CLI

 To enter the command level: enable -> config -> arp

xSenso User Guide 95