4: Installation of xSenso 21A2

To reboot the unit without resetting the unit to factory defaults:

1.Place the end of a paper clip or similar object into the RST (reset) opening (see Figure 4-2) and press and hold down micro switch during a power cycle for 3 to 5 seconds.

2.Remove the paper clip to release the button. The unit will reboot.

Side Panels

The following are located on the side panels (Figure 4-6):

Right Side

Analog Input 1

Analog Input 2

9-30 VDC 3 Pin Terminal Block Power Input

9-30 VDC Barrel Locking Power Input

Left Side

Analog Output 1

Analog Output 2

Figure 4-6 xSenso, Side Views

9-30 VDC Barrel

Locking Power Input

 

 

 

 

 

 

 

 

 

Excitation

 

 

 

 

 

Voltage Input

 

 

 

 

Current Input

Analog Analog

Output 1 Output 2

Back Panel

On the xSenso back panel, there is a mounting bracket with a sliding orange clip which allows you to mount and dismount the device from a DIN rail, as shown in Figure 4-7. There are also four rubber feet that can be attached to the bottom-side of the device, if the xSenso is to be placed on a flat surface.

xSenso User Guide

32

Page 31 Page 33
Page 32
Image 32
Lantronix XSENSO 21A2, XSENSO 21R2, XSENSO 2100 manual Side Panels, XSenso, Side Views
Page 31 Page 33

XSENSO 2100, XSENSO 21A2, XSENSO 21R2 specifications

Lantronix, a leader in secure communications and IoT solutions, offers a range of innovative products that cater to various industrial and commercial needs. Among their impressive lineup are the XSENSO 21R2, XSENSO 21A2, and XSENSO 2100 devices, each designed for remote monitoring and control applications that require reliability and versatility.

The XSENSO 21R2 is a powerful device focused on advanced sensor management. It features multiple analog and digital inputs, enabling users to monitor a wide variety of environmental parameters such as temperature, humidity, and pressure. This model excels in applications requiring real-time data collection and analysis. Its robust construction ensures high performance in challenging environments, making it ideal for industrial settings. The XSENSO 21R2 also incorporates cloud connectivity options, allowing for seamless data transfer and integration with existing IoT infrastructures.

Similarly, the XSENSO 21A2 is designed for users who prioritize ease of use along with functionality. This device is equipped with a user-friendly interface that simplifies configuration and monitoring. It supports various communication protocols, ensuring compatibility with different systems and applications. The XSENSO 21A2 boasts a compact design, suitable for space-constrained installations, and provides options for local and remote access to data, enhancing user flexibility.

The XSENSO 2100 stands out with its high-performance processing capabilities, making it suitable for complex monitoring tasks. Its enhanced computing power allows it to run sophisticated analytics directly on the device, thereby reducing latency and bandwidth consumption. The XSENSO 2100 is especially useful in scenarios that require extensive data processing at the edge, such as predictive maintenance and machine learning applications. It is equipped with advanced security features, ensuring that sensitive data remains protected during transmission and storage.

All three models embody Lantronix's commitment to innovation, incorporating the latest technologies such as wireless connectivity options, cloud integration, and support for various industry standards. Their scalability makes them suitable for projects of all sizes, from small businesses to large enterprises. These devices not only enhance operational efficiency but also empower businesses to make data-driven decisions, ultimately leading to improved performance and cost savings. With Lantronix’s XSENSO devices, organizations can take a significant step towards realizing their IoT aspirations.
Top Page Image Contents