Lathem 7000E manual Set the 1st starting date, Set the 2nd starting date

Example 3

Semimonthly closing in Payroll Mode ----- the starting dates are 1st and 16th.

MODE

FUNCTION CHANGE SET

Semimonthly

closing

MODE

FUNCTION CHANGE SET

1st starting

date

MODE

FUNCTION CHANGE SET

2nd starting

date

MODE

1 Push the FUNCTION button for 3 seconds and position the "" under the "MODE" mark.

Set the "Mode".

2 In the case of semimonthly closing, push the CHANGE button to set the left-side number at "4" and then push the SET button. At that moment, the flashing of the display will change to the middle number.

Set the "1st starting date".

3 To set pay period, you have to input

a starting date. In this case, the 1st starting date is 1st. Push the CHANGE button to set at "1" and then push the SET button. At that moment, the flashing of the display will change to the right-side number.

Set the "2nd starting date".

FUNCTION CHANGE

SET

4 In this case, the 2nd starting date is 16th. Push the CHANGE button to set at "16" and then push the SET button.

5 Push the SET button once again.

22