
8. INSTALLING Ni-Cd BATTERY (Optional)
Follow the steps below to install a
Lid
Clasp
Battery
Connector
1 Remove the lid of the battery compartment on the back of the unit by pushing up the center of the lid, and then release it from the two clasps.
2 Position the battery as shown in the figure on the left .
*The connector cord should be on the right side, as shown in the figure.
Connector
Battery | 3 Connect the connector. Tuck away the |
| |
| connector cord into the open space in |
| the compartment. |
4 Insert the lid into the slot as shown on the left. Keep pressing it down until it hooks to the clasp.
* Make sure the cord is not caught when closing the lid.
37