Mounting Unit on Wall
The unit can be mounted on a wall using the supplied mounting fittings. To mount the unit on a wall, take the following steps:
1 Install wall mount screws (supplied) into a wall 3.94 inches (10 cm) apart. Be sure to keep about 0.12 inch ( 3 mm) of the screw head out of the wall.
.94" | (10cm) |
| |
3 |
|
The supplied screws are intended for use on a thick wooden wall or wooden column. Do not use them on any other materials. There is a danger that the unit may come off if used on other materials.
(3mm)0.12"
2 Mount the wall mount fittings as shown on the right.
Environmental Conditions
Avoid placing the unit in environments that are:
•humid or dusty
•exposed to direct sunshine
•subject to frequent or continuous vibrations
•outside the temperature range between 23˚F
•affected by chemicals or ozone
7
