Legacy Car Audio ML3245, ML3215 manual English, Display Option Settings Menu

ENGLISH

13

Busy Lock	Busy Lock On/Off
Marked Idle	Marked Idle On/Off
Scan Set	Scan Mode	Normal Scan Tx
		Prionity Scan Tx
		Prionity Select Scan
		Priority Only Tx
	Scan Speed Time	50 ~ 500 msec
	Scan Delay Time	1 ~ 30 sec
	Lock Back Time	1 10 sec

Display Option Setting

Channel Display Format Name Character Display

Channel No. Display

Frequency Display

Slide Set	Slide On
	Slide Off
Back Light Set	Light Off
	Dim Mid
	Dim High

ENGLISH

14

		~
Priority Scan	On	Prionity Channel 1~16
	Off
Tx Delay	On/Off
Clear To Talk	On/Off
Roger Beep	On/Off
2-Tone Alarm set	On/Off
Microphone Hook	Off	Hook Off Scn	Off
	On		On
Audio Compander	On/Off

Display Option Settings Menu

With the radio powered on, select the desired channel. Press the MODE button and then the up or down buttons until DISPLAY appears. Press and release the MODE button to select. Sub- menu settings include: CH.DISP

SLIDE ST

BACK LGT

You can toggle between these settings with the up or down buttons. When the desired setting appears on screen, press the MODE button to select. If you select CH DISP, your choices will include: NAME, CH NO , and FREQUENCY (Name, Channel Number and Frequency). You can toggle between these settings with the up or down buttons. When the desired setting appears on the display, press the MODE button to view the current information for that setting.

Example of Name display: TOPA23.

NOTE: The Name, Channel Number and Frequency settings are display-only settings. You can not change them within these screens.

If you select the Slide Setting, your choices include Slide On or Slide Off. Toggle between the settings with the up or down buttons. When the desired setting appears on screen, press the MODE button. Your radio will save your On or Off selection and return to standby mode. NOTE: If Slide Setting is On, and the radio is in standby for more than 1 minute, a slide message pre-programmed by your Dealer will scroll on screen.

P/A Option Settings

To enable the P/A Option, press and hold down the T/A button for 2 seconds. To turn the P/A Option off, press and hold down the T/A button for 2 seconds.

Example of P/A display: P/A MODE

Weather Alert Option Setting

To enable the Weather Alert Option, press and hold down the WX button for 3 seconds. To turn the Weather Alert Option off, press and hold down the WX button for 3 seconds.

ACC-733 DTMF Microphone Operation

The ACC-733 can be used for telephone interconnect or other DTMF applications. Consult your Dealer for other application possibilities.

The ACC-733 can be operated in an auto dial mode or manually operated and is back lighted for low light conditions.

A telephone ringer will be heard when a telephone connection has been established or for an incoming call.

Auto Dial Operation

Up to 16 digits can be dialed when using auto dial. Follow these steps to place a call using auto dial.

A.Enter the desired number by pressing and releasing 0 -9, * or # keys. The dialed numbers will appear in your radio display. # will be indicated as F in your display. Note: The # key is normally used to end, or hang up, an interconnect system. Consult your Dealer for exact system operation. The * key will be indicated as E.

B.Press the SND key to send the dialed number.

C.When the called party answers, press the P-T-T of the microphone to answer. Release the P-T-T to listen for a response.

D.When the conversation has ended, press and hold the P-T-T of the microphone. Press and hold the # key for 1 or 2 seconds to end the call. Release the P-T-T when the call has ended.

Manual Dial Operation

A. Press and hold the P-T-T of the microphone and enter the desired number by pressing and releasing 0 -9, * or # keys. The dialed numbers will appear in your radio display. # will be indicated as F in your display. Note: The # key is normally used to end, or hang up, an interconnect system. Consult your Dealer for exact system operation. The * key will be indicated as E.

B.When dialing is complete, release the P-T-T and wait for the called party to answer.

C.When the called party answers, press the P-T-T of the microphone to answer. Release the P-T-T to listen for a response.

D.When the conversation has ended, press and hold the P-T-T of the microphone. Press and hold the # key for 1 or 2 seconds to end the call. Release the P-T-T when the call has ended.