Lenovo 1982, 1993 Installing or replacing a memory module, What to do next, Installing a PCI card

7. Pivot the card latch to the closed position to secure the PCI card.

Figure 13. Installing a PCI card

What to do next:

•To work with another piece of hardware, go to the appropriate section.

•To complete the installation or replacement, go to “Completing the parts replacement” on page 61.

Installing or replacing a memory module

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important safety information” on page v.

This section provides instructions on how to install or replace a memory module.

Your computer has four slots for installing or replacing DDR3 UDIMMs that provide up to a maximum of 16 GB system memory. When installing or replacing a memory module, use the following guidelines:

•Use 2 GB or 4 GB DDR3 UDIMMs in any combination up to a maximum of 16 GB.

•Install memory modules in the sequence of DIMM 3, DIMM 4, DIMM 1, and DIMM 2. See “Locating parts on the system board” on page 12.

To install or replace a memory module, do the following:

1.Turn off the computer and disconnect all power cords from electrical outlets.

2.Remove the computer cover. See “Removing the computer cover” on page 30.

3.Lay the computer on its side for easier access to the system board.

4.Locate the memory slots. See “Locating parts on the system board” on page 12.

34ThinkCentre User Guide