Lenovo 20CD0033US manual Installing a flash media card, Click Hardware and Sound

•MultiMediaCard (MMC) module

•Secure Digital eXtended-Capacity(SDXC) card

•Secure Digital (SD) card

•Secure Digital High-Capacity (SDHC) card

Note: Your computer does not support the CPRM feature for the SD card.

Attention: While transferring data to or from a flash media card, such as an SD card, do not put your computer into sleep or hibernation mode before the data transfer completes; otherwise, your data could become damaged.

Installing a flash media card

Attention:

•Before you start installing a card, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. Static electricity could damage the card.

To install a flash media card, do the following:

1.Ensure that the card is correctly oriented.

2.Insert the card firmly into the slot of the 4-in-1 media card reader.

If the plug-and-play feature is not enabled for the installed flash media card, do the following to enable the feature:

1.Go to Control Panel.

2.Click Hardware and Sound.

3.Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

4.From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts.

5.Follow the instructions on the screen.

Removing a flash media card

Attention:

•Before removing a card, stop the card first. Otherwise, data on the card might be damaged or lost.

•Do not remove a card while the computer is in sleep mode or hibernation mode. Otherwise, the system might not respond when you try to resume operation.

To remove a card, do the following:

1.Click the triangular icon on the taskbar to show hidden icons. Then, right-click the Safely Remove Hardware and Eject Media icon.

2.Select the item you want to remove to stop the card.

3.Press the card to eject it from your computer.

4.Remove the card and store it safely for future use.

Note: If you do not remove the card from your computer after you eject the card from the Windows operating system, the card can no longer be accessed. To access the card, you must remove it first, then insert it again.

42User Guide