Main menu

When you enter the ThinkPad Setup program, you will first see the Main menu as follows:

UEFI BIOS Version

UEFI BIOS Date

Embedded Controller Version

ME Firmware Version

Machine Type Model

System-unit serial number

System board serial number

Asset Tag

CPU Type

CPU Speed

Installed memory

UUID

MAC Address (Internal LAN)

Preinstalled OS License

UEFI Secure Boot

Config menu

To change the configuration of your computer, select Config tab from the ThinkPad Setup menu.

The following table lists the Config menu items. Default values are in boldface.

Attention: The default configurations are already optimized for you. Improper change of the configurations might cause unexpected results.

Table 3. Config menu items

Menu item

Submenu item

Selection

Comments

 

 

 

 

 

USB

USB UEFI BIOS Support

Disabled

Enable or disable boot support

 

 

Enabled

from USB storage devices.

 

 

 

 

 

 

 

 

 

Always On USB

Disabled

The USB connectors can charge

 

 

Enabled

external device during low power

 

 

states (standby, hibernate or

 

 

 

 

 

 

 

 

power-off). If the system runs on

 

 

 

 

battery mode, this will work only

 

 

 

 

in standby state.

 

 

 

 

Enabled: USB connectors

 

 

 

 

are powered during low

 

 

 

 

power states.

 

 

 

 

Disabled: USB connectors

 

 

 

 

are disabled during low power

 

 

 

 

states.

 

 

 

 

 

 

Always On USB Charge in

Disabled

Enable or disable charging

 

off mode

Enabled

iPod(R), iPhone(TM), or

 

 

BlackBerry(R) smartphone

 

 

 

 

 

 

 

 

when system is turned off.

 

 

 

 

 

Chapter 7. Advanced configuration 65

Page 79
Image 79
Lenovo 20CD0033US manual Main menu, Config menu, Menu item Submenu item Selection Comments, Enabled, Disabled