Table 29. Removal steps of base cover assembly, I/O sub card, and I/O sub card cable (continued)
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels:
18
Homologation label
Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
19
20
Windows license label (COA)
Qualcomm Wireless WAN label
Ericsson wireless WAN label
Wireless LAN MAC address label
MAC address label
SIRM labels
Israel label (76.3 mm x 31.6 mm)
Wireless card label (only for Brazil)
Modem label (only for PRC model)
Bluetooth label (only for Brazil)
China wireless WAN label
Israel label (63.5 mm x 19 mm)
Anatel wireless WAN label (only for Brazil)
Vodafone label
Modem AMOM label (only for Brazil)
FCC label
Information label
Serial number label
Asset tag label
For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover.
