2060 Wireless LAN antenna assembly or wireless LAN/WAN antenna assembly
For access, remove these FRUs in order:
•“1010 Battery pack” on page 85
•“1020 ExpressCard blank bezel” on page 86
•“1050 DIMM slot cover” on page 90
•“1070 PCI Express Mini Card for wireless WAN” on page 92
•“1080 Keyboard” on page 94
•“1110 PCI Express Mini Card for wireless LAN” on page 103
•“1120 Keyboard bezel assembly, FPC cable, and Bluethooth daughter card
•“1150 Speaker assembly” on page 112
•“1160 LCD unit” on page 114
•“2010 LCD bezel assembly” on page 135
•“2020 LED board” on page 137
•“2030 Integrated camera” on page 138
•“2040 LCD panel and LCD cable” on page 139
•“2050 Camera cable” on page 141
Table 37. Removal steps of wireless LAN antenna assembly or wireless LAN/WAN antenna assembly
1
1
2 | 2 | 2 | 2 | 2 |
|
|
|
| 1 |
|
|
|
| 1 |
| 1 |
| 1 |
|
| 1 |
| 1 |
|
When installing: When you install the antenna kit, route the cables as shown in the figure above. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
