
Table 1. FRU tests (continued)
FRU | Applicable test |
|
|
TrackPoint or pointing | If the TrackPoint does not work, check the configuration as specified in the BIOS Setup |
device | Utility. If the TrackPoint is disabled, select Automatic to enable it. |
| After you use the TrackPoint, the pointer may drift on the screen for a short time. This |
| drift can occur when a slight, steady pressure is applied to the TrackPoint pointer. |
| This symptom is not a hardware problem. If the pointer stops after a short time, no |
| service action is necessary. |
| If enabling the TrackPoint does not correct the problem, continue with the following: |
| • Interactive Tests ➙ Mouse |
Touch Pad | If the Touch Pad does not work, check the configuration as specified in the BIOS Setup |
| Utility. If the Touch Pad is disabled, select Automatic to enable it. If enabling the Touch |
| Pad does not correct the problem, continue with the following: |
| • Interactive Tests ➙ Mouse |