1040 Hard disk drive (HDD) slot cover, HDD rubber rails and HDD or storage converter and solid state drive (SSD)
For access, remove this FRU:
•“1010 Battery pack” on page 85
Attention:
•Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.
•Before removing the drive, have the user make a backup copy of all the information on it if possible.
•Never remove the drive while the system is operating or is in suspend mode.
Table 12. Removal steps of HDD slot cover, HDD rubber rails and HDD or storage converter and solid state drive (SSD)
1
2
| Step | Screw (quantity) | Color | Torque | |
|
|
|
|
|
|
|
|
| M3 × 3 mm, | Black | 0.392 Nm |
| 1 |
| |||
|
|
|
|
| (4.0 kgfcm) |
|
|
|
|
|
|
