Figure 14. Removing a PCI card
Notes:
a.The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small amount until it is removed from the card slot.
b.If the card is held in place by a retaining latch, press the card retaining latch disengage the latch. Grasp the card and gently pull it out of the slot.
1
as shown to
5.Remove the new PCI card from its
6.Install the new card into the appropriate slot on the system board. See “Locating parts on the system board” on page 12.
Note: If you are installing a PCI Express x16 graphics card, ensure that the memory slot retaining clips are closed before you install the graphics card.
Chapter 5. Installing or replacing hardware 37
