Lenovo 2756D7U, 2697 manual Networking problems, The image is discolored, Ethernet problems

2.Adjust the placement of the monitor and other devices so that they are at least 305 mm (12 inches) apart.

3.Turn on the monitor.

•You can reset the refresh rate through your operating system Control Panel:

On the Windows 7 operating system, click Start ➙ Control Panel ➙ Hardware and Sound ➙ Adjust screen resolution ➙ Advanced Settings. Then click the Monitor tab and select a new refresh rate.

•See your operating system documentation or help for further information on monitor settings.

If these actions do not correct the problem, your monitor might need service. See Chapter 11 “Getting information, help, and service” on page 127 for details.

The image is discolored

Symptom: The image is discolored.

Action: The monitor might be affected by interference from nearby equipment. Magnetic fields around other devices, such as transformers, appliances, fluorescent lights, and other monitors might be causing the problem. Move fluorescent desk lighting or any equipment that produces magnetic fields further away from the monitor. If this does not correct the problem, do the following:

1.Turn off the monitor. (Moving a color monitor while it is turned on might cause screen discoloration.)

2.Adjust the placement of the monitor and other devices so that they are at least 305 mm (12 inches) apart.

3.Turn on the monitor.

If these actions do not correct the problem, your monitor might need service. See Chapter 11 “Getting information, help, and service” on page 127 for details.

Networking problems

The following are the most common networking problems. Select your networking problem from the following list:

•“Ethernet problems” on page 118

•“A wireless LAN problem” on page 120

•“A wireless WAN problem” on page 120

•“Bluetooth problems” on page 120

For more information, see “Help and Support” on page 127.

Ethernet problems

For Ethernet problems, select your symptom from the following list:

•“Your computer cannot connect to the network” on page 118

•“The adapter stops working for no apparent reason” on page 119

•“If your computer is a Gigabit Ethernet model and you use a speed of 1000 Mbps, the connection fails or errors occur” on page 119

•“If your computer is a Gigabit Ethernet model, it cannot connect to the network at 1000 Mbps. Instead, it connects at 100 Mbps” on page 119

Your computer cannot connect to the network

Symptom: Your computer cannot connect to the network.

Actions: Ensure that:

118ThinkCentre User Guide