2.Connect a new keyboard or mouse to one of the USB connectors on the computer. Depending on where you want to connect the new keyboard or mouse, see “Locating connectors, controls, and indicators on the front of your computer” on page 7 or “Locating connectors on the rear of your computer” on page 8.
Figure 41. Connecting the USB keyboard or mouse
What to do next:
•To work with another piece of hardware, go to the appropriate section.
•To complete the installation or replacement, go to “Completing the parts replacement” on page 55.
Completing the parts replacement
After completing the installation or replacement for all parts, you need to reinstall the computer cover and reconnect cables. Depending on the parts you installed or replaced, you might need to confirm the updated information in the Setup Utility program. Refer to Chapter 7 “Using the Setup Utility program” on page 65.
To reinstall the computer cover and reconnect cables to your computer, do the following:
1.Make sure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer. See “Locating components” on page 10 for the locations of various components in your computer.
2.If you have removed the front bezel, reinstall it.
3.Make sure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of the hinges and sides of the computer chassis to avoid interference with reinstalling the computer cover.
4.Align the cover with the chassis and then close the cover to engage the cover latch.
5.Use the key to lock the keylock on the computer cover. See “Locking the computer cover” on page 24.
6.If there is a padlock available, lock the computer cover. See “Installing a padlock” on page 25.
7.If there is an integrated cable lock available, lock the computer. See “Attaching an integrated cable lock” on page 26.
8.Reconnect the external cables and power cords to the computer. See “Locating connectors on the rear of your computer” on page 8.
9.To update your configuration, refer to Chapter 7 “Using the Setup Utility program” on page 65.
Note: In most areas of the world, Lenovo requires the return of the defective Customer Replaceable Unit (CRU). Information about this will come with the CRU or will come a few days after the CRU arrives.
Obtaining device drivers
You can obtain device drivers for operating systems that are not preinstalled at http://www.lenovo.com/support. Installation instructions are provided in readme files with the
