Lenovo C400 manual Using the wireless features, Installation, Using the projector software

Chapter 3. Using the wireless features

This chapter provides information on using the wireless features of the C400

Wireless Projector.

Installation

Follow the instructions below to install the Lenovo Wireless Projecting Software.

Note: If there is a previous version of Lenovo Wireless Projecting Software, it is recommended to first uninstall it, then restart the computer prior to installing the new version.

To install the software from the CD or view the User’s guide:

1.Insert the C400 Wireless Projector Software & User’s Guide CD into the CD or DVD drive. If the CD starts automatically, go to Step 5.

2.If the CD does not start, click Start and then click Run.

3.Type e:\launch.bat where e is the drive letter of the CD or DVD drive.

4.Click OK. The CD browser window opens.

5.Follow the on-screen instructions.

Using the projector software

Lenovo Wireless Projecting Software includes many features such as:

vStarting a wireless projecting session

vSearching for a wireless projector

vBinding a wireless projector

vRetrieving the property details of a wireless projector

vQuick projection

vSelecting a WLAN adapter

vRemote control emulation

vUSB image display

vEnding a wireless projecting session

Starting a wireless projecting session

To start a wireless projecting session, please follow the steps below:

1.Turn on the wireless projector.

2.Start the Wireless Projecting Software either through the Start menu or through the desktop icon.

Note: ThinkPad users can press Fn+F7 and use the pre-set scheme;

Presentation on Lenovo Wireless Projector.

3.The Wireless Projecting Software will then search for wireless projectors and available projectors will be listed. Clicking Refresh will refresh the list.

For a WEP-enabled wireless projector, there will be a lock mark on the top left corner of the projector icon.

© Lenovo 2005. Portions © IBM Corp. 2004. 3-1