Lenovo C400 manual On-ScreenDisplay menu controls, Navigating the OSD, Language, Quality menu

Chapter 7. On-Screen Display menu controls

This projector has an On-Screen Display (OSD) that lets you make image adjustments and change various settings.

Note: You must have a display on the screen in order to access some functions of the OSD.

Navigating the OSD

You can use the remote control or the buttons on the top of the projector to navigate and make changes to the OSD. The following sections show the menus in the OSD.

Language

To set the OSD language, do the following:

Note: The default OSD language is English.

1.Press the Menu button.

2.Press the cursor left/right buttons until Language is highlighted.

3.Press the cursor up/down buttons until the language you want is highlighted.

4.Press Enter to select the language.

5.Press the Menu button twice to close the OSD.

The image below shows the Language menu. The default language is English.

Quality menu

The Quality menu can be found through the main menu. To access the Quality menu, follow these steps:

1.Press the Menu button to open the main menu.

© Lenovo 2005. Portions © IBM Corp. 2004. 7-1