Lenovo C400 manual Turning off the projector

Attention: Do not look directly into the projection lens when the lamp is turned on. The bright light might harm your eyes.

6.If you have connected more than one input device to the projector, toggle the Source button to change devices. (DVD and HDTV are supported through the DVI-I cable connector.)

7.For information on turning off the projector, go to ″Turning off the projector.″

Attention: Before moving the projector, be sure to power down the projector properly and disconnect the projector from the main power source. See ″Turning off the projector″ for more information on turning off the projector normally.

Turning off the projector

To turn off the projector, do the following.

1.Press the Power button.

The projector prepares for shut-down and the Wait a moment message displays, as shown below. The projector turns off automatically within 5 seconds.

Note: This operation can be cancelled by pressing a button other than the

Power button.

2.Press the Power button when the Power Off?/Press Power again message displays, as shown below.

2-2C400 Wireless Projector: User’s Guide