Lenovo G410, G400 warranty Replacing Memory

Lenovo EVEREST UG.book Page 51 Friday, August 17, 2007 5:40 PM

Replacing Memory

9.Make sure that the memory module is firmly fixed in the slot and does not move easily.

10.Reinstall the cover of the memory slot by inserting the tabs into the slots first a, and closing the cover b. Then tighten the two screws c.

2 3

1 3

1

Attention: When you have added the SO-DIMM, do not use your computer until you have closed the memory slot cover. Never use the computer with the cover open.

11.Reinstall the battery.

12.Turn the computer over again, and reconnect the ac adapter and cables to the computer.

If you want to replace a new SO-DIMM, remove the origin SO-DIMM by releasing the two latches on both edges of the socket at the same time, pull out the SO-DIMM from the socket, and then install the new SO-DIMM follow the steps above.

Attention: If only one SO-DIMM is installed, plug it into the SO-DIMM socket which is closer to the mainboard.

51