Lenovo R50 manual Upgrading the hard disk drive, Handling a hard disk drive, Notes

Upgrading the hard disk drive

Notes:

1.Replace the hard disk drive only if you upgrade it or have it repaired. The connectors and bay of the hard disk drive were not designed for frequent changes, or drive swapping.

2.The Rescue and Recovery workspace and the Product Recovery program are not contained in the optional hard disk drive.

Attention

Handling a hard disk drive

vDo not drop the drive or subject it to physical shocks. Put the drive on a material, such as soft cloth, that absorbs the physical shock.

vDo not apply pressure to the cover of the drive.

vDo not touch the connector.

The drive is very sensitive. Incorrect handling can cause damage and permanent loss of data on the hard disk. Before removing the hard disk drive, make a backup copy of all the information on the hard disk, and then turn the computer off. Never remove the drive while the system is operating, in standby mode, or in hibernation mode.

To replace the hard disk drive, do the following:

1.Turn off the computer; then disconnect the ac adapter and all cables from the computer.

2.Close the computer display, and turn the computer over.

3.Remove the battery.

4.Remove the screw that secures the hard disk drive.

5.Open the computer display; then stand the computer on its side and remove the hard disk drive by pulling the cover away from the computer.

34ThinkPad® R50 Series Service and Troubleshooting Guide