Lenovo W700ds manual Upgrading and replacing devices

7.Find the notch on the contact edge side of the SO-DIMM you are installing.

Attention: To avoid damaging the SO-DIMM, do not touch its contact edge.

With the notched end of the SO-DIMM toward the contact edge side of the socket, firmly insert the SO-DIMM into the socket at an angle of about 20 degrees
1; then pivot it downward until it snaps into place
2. Make sure that the SO-DIMM is firmly fixed in the slot and cannot be moved easily.

2

1

1

2

20

Note: If you install a memory module in only one of the two memory slots, install it in the slot indicated as “SLOT-0”.

Chapter 5. Upgrading and replacing devices 49