Message | Solution |
|
|
0280: Previous boot | Your computer was previously unable to complete the boot |
incomplete | process. |
| Turn the computer off; then turn it on to start the BIOS Setup |
| Utility. Verify the configuration and then restart the computer |
| either by choosing the Exit Saving Changes option under the |
| Restart item or by pressing F10. If you still see the same error |
| code, have the computer serviced. |
|
|
1802: Unauthorized | The |
network card is | Remove it. |
plugged in - Power |
|
off and remove the |
|
miniPCI network |
|
card. |
|
|
|
1803: Unauthorized | The daughter card is not supported on this computer. Remove |
daughter card is | it. |
plugged in - Power |
|
off and remove the |
|
daughter card. |
|
|
|
1830: Invalid | The current memory configuration is not supported. If you |
memory | install a memory module in only one of the two memory slots, |
configuration - | install it in the slot indicated as |
Power off and install |
|
a memory module to |
|
| |
slot. |
|
|
|
2100: Initialization | The HDD or SSD is not working. Have the drive serviced. |
error on HDD0 |
|
(Main hard disk |
|
drive) |
|
|
|
2102: Initialization | The HDD or SSD is not working. Have the drive serviced. |
error on HDD1 |
|
(Ultrabay hard disk |
|
drive) |
|
|
|
2110: Read error on | The HDD or SSD is not working. Have the drive serviced. |
HDD0 (Main hard |
|
disk drive) |
|
|
|
2112: Read error on | The HDD or SSD is not working. Have the drive serviced. |
HDD1 (Ultrabay |
|
hard disk drive) |
|
|
|
Chapter 3. Solving computer problems 15
